08/27/2025 5:22 p.m.
http://34.77.62.133/en/products/2x4-4k-3d-ports-hdmi-14b-selector-and-multiplier-SA949/
http://34.77.62.133/en/products/2x4-4k-3d-ports-hdmi-14b-selector-and-multiplier-SA949/
2x4 4K 3D ports HDMI 1.4b selector and multiplier
2x4 4K 3D ports HDMI 1.4b selector and multiplier
REF: SA949
RENEWED
Product comes from return with slight signs of use. Old model with some difference in the front and back as you can see in the photos.
Original product specifications
- HDMI ports selector. It has two input HDMI female ports of which one of them is selected as an active port by means of a push button on the front panel.
- HDMI port multiplier. Replicates the selected signal (or active signal) on the four female HDMI output ports.
- The output ports are fully synchronized and replicate the same signal from the active input port.
- AmpSignal heater up to 30 m which varies depending on the quality of the HDMI cable used and the environment. It supports a maximum of 15 m of cable at the entrance and 15 m of cable at the exit. Distances using AWG26 cable.
- Possibility of cascading two or more multipliers to extend the system and obtain greater cable distances from the HDMI signal source (an additional 15 m).
Watch video
Go back to the new product
![simple_arrow_right]()
PVP
€39.42
You save 32.21
Price including VAT:
€48.49
PVD
€34.32
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
RENEWED
100%safe
Original product specifications
- HDMI ports selector. It has two input HDMI female ports of which one of them is selected as an active port by means of a push button on the front panel.
- HDMI port multiplier. Replicates the selected signal (or active signal) on the four female HDMI output ports.
- The output ports are fully synchronized and replicate the same signal from the active input port.
- AmpSignal heater up to 30 m which varies depending on the quality of the HDMI cable used and the environment. It supports a maximum of 15 m of cable at the entrance and 15 m of cable at the exit. Distances using AWG26 cable.
- Possibility of cascading two or more multipliers to extend the system and obtain greater cable distances from the HDMI signal source (an additional 15 m).
Original product info
Multiplier, selector and HDMI amplifier with 2 input ports and 4 output ports. From two input HDMI signals this device multiplies the selected signal into two identical outputs. This multiplier has the capacity to store data (buffering), amplify them and distribute them through their output ports. It also amplifies the HDMI signal up to a cable length of 30m.
Specifications
Specifications
- HDMI ports selector. It has two input HDMI female ports of which one of them is selected as an active port by means of a push button on the front panel.
- HDMI port multiplier. Replicates the selected signal (or active signal) on the four female HDMI output ports.
- The output ports are fully synchronized and replicate the same signal from the active input port.
- AmpSignal heater up to 30 m which varies depending on the quality of the HDMI cable used and the environment. It supports a maximum of 15 m of cable at the entrance and 15 m of cable at the exit. Distances using AWG26 cable.
- Possibility of cascading two or more multipliers to extend the system and obtain greater cable distances from the HDMI signal source (an additional 15 m).
- Supported resolution: 3840 x 2160/ 30Hz.
- Compatible with HDMI 1.4b, 1.4a, HDCP 1.0, HDCP 1.1 and HDCP 1.2.
- Compatible with 3D and 4K video technology.
- Supported HDTV resolution: 24, 50, 60fs, 2160, 1080p, 1080i, 720p, 576p, 576i, 480p and 480i.
- Depth of color: 8/10/12 bit.
- Supported audio format: DTS-HD, Dolby-True-HD, LPCM-7.1, DTS, Dolby-AC3 and DSD.
- Maximum bandwidth: 300 MHz.
- Sampling frequencymaximum: 3 Gbps.
- Compact size, very small, and mounted in black metal casing.
- External 5VDC power supply is supplied.
- Status LEDs for all ports.
- Compact size: 200 x 70 x 25 mm.
- It has a switch (ON and OFF) on the front panel.
- It has push button for the selection of the entrance port.
- Gross Weight: 530 g
- Product size (width x depth x height): 19.9 x 7.0 x 2.5 cm
- Number of packages: 1
- Packages size: 22.5 x 17.5 x 5.5 cm
- Master-pack: 1
Technical terms
- HDMI
- test3
- test3
HDMI
The acronym "HDMI" stands for "High Definition Multimedia Interface".
The HDMI interface allows transmission of video and audio between devices, supporting video resolutions 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1440p, 1600p.
Different HDMI versions
HDMi 1.0
- December 2002.
- Maximum transfer of 4.9 Gbit/s.
- Supports up to 165 Mpixels/s video mode (1080p or UXGA 60Hz) and 8-channel/192 kHz/24-bit audio mode.
HDMI 1.2
- August 2005.
- Added support for One Bit Audio, used on Super Audio CDs, up to 8 channels.
- Availability HDMI Type A connectors for PC.
HDMI 1.3
- June 2006
- Bandwidth 340 MHz.
- Data rate of 10.2 Gbit/s.
- Dolby TrueHD and DTS-HD,
HDMI 1.4
- Send video and audio HD
- Data and 3D video.
- FullHD to XHD (eXtended High Definition) up to 4096 × 2160 pixels (24 frames per second) or 3840 × 2160 (30 fps).
- Audio Return Channel that will need fewer cables to have a surround sound system connected to the TV.
- Built-in Ethernet connection cable with speeds up to 100 Mbit/s own.
HDMi 2.0
- September 2013
- Bandwidth of up to 18 Gbit/s
- 4K @ 50/60 (2160p) video
- Up to 32 audio channels to a multi-dimensional immersive experience
- Up frequency 1536kHz for maximum audio fidelity sound
- Simultaneous Delivery 2 streaming video to multiple users on the same screen
- Streaming audio up to 4 users
- Support theater angle 21:9 radio
- Dynamic synchronization of video and audio in streaming
- Extensions of CEC commands to control multiple devices from a single point.
Type HDMI
Type A (picture 1): It is the standard connector used in almost all devices.
Type B (picture 2): A connector rarely used.
Type C (picture 3): A connector widely used in tablets, smartphones and other devices.
Type D (picture 4): A connector used in smartphones.
Type E (picture 5): IA connector used for vehicles connectivity.
The HDMI interface allows transmission of video and audio between devices, supporting video resolutions 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1440p, 1600p.
Different HDMI versions
HDMi 1.0
- December 2002.
- Maximum transfer of 4.9 Gbit/s.
- Supports up to 165 Mpixels/s video mode (1080p or UXGA 60Hz) and 8-channel/192 kHz/24-bit audio mode.
HDMI 1.2
- August 2005.
- Added support for One Bit Audio, used on Super Audio CDs, up to 8 channels.
- Availability HDMI Type A connectors for PC.
HDMI 1.3
- June 2006
- Bandwidth 340 MHz.
- Data rate of 10.2 Gbit/s.
- Dolby TrueHD and DTS-HD,
HDMI 1.4
- Send video and audio HD
- Data and 3D video.
- FullHD to XHD (eXtended High Definition) up to 4096 × 2160 pixels (24 frames per second) or 3840 × 2160 (30 fps).
- Audio Return Channel that will need fewer cables to have a surround sound system connected to the TV.
- Built-in Ethernet connection cable with speeds up to 100 Mbit/s own.
HDMi 2.0
- September 2013
- Bandwidth of up to 18 Gbit/s
- 4K @ 50/60 (2160p) video
- Up to 32 audio channels to a multi-dimensional immersive experience
- Up frequency 1536kHz for maximum audio fidelity sound
- Simultaneous Delivery 2 streaming video to multiple users on the same screen
- Streaming audio up to 4 users
- Support theater angle 21:9 radio
- Dynamic synchronization of video and audio in streaming
- Extensions of CEC commands to control multiple devices from a single point.
Type HDMI
Type A (picture 1): It is the standard connector used in almost all devices.
Type B (picture 2): A connector rarely used.
Type C (picture 3): A connector widely used in tablets, smartphones and other devices.
Type D (picture 4): A connector used in smartphones.
Type E (picture 5): IA connector used for vehicles connectivity.
