01/06/2025 7:15 a.m.
http://34.77.62.133/en/products/kit-power-over-ethernet-poe-injector-splitter-RA051/
Kit Power Over Ethernet (PoE Injector + Splitter)
REF: RA051
Specifications
  • Kit that consists of two modules of reduced size: the injector and the splitter.
  • The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8).
  • Together with the INJECTOR, a 15VDC power supply is supplied to inject the current.
  • By tando it has power input, RJ45 input (LAN) and RJ45 output (LAN +DC).
  • The SPLITTER (or separator) again separates the data and the DC current (LAN + DC) that will feed the device.
More info
PVP 40.16
36.14
Price including VAT: 44.45
PVD 35.30
31.77
Shipping costs: 43,11 *
IE-D02 DY88
2 years
warranty
14 days
returns
OUTLET

In stock
Available more than 10

More info
Specifications
  • Kit that consists of two modules of reduced size: the injector and the splitter.
  • The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8).
  • Together with the INJECTOR, a 15VDC power supply is supplied to inject the current.
  • By tando it has power input, RJ45 input (LAN) and RJ45 output (LAN +DC).
  • The SPLITTER (or separator) again separates the data and the DC current (LAN + DC) that will feed the device.

Keywords

Did not find what you were looking for? These topic could help you

More info

Kit that consists of two modules of reduced size: the injector and the splitter. The INJECTOR inserts DC current in the UTP cable without affecting the operation of the data transmission of the network itself, using free wires (pin 4, 5, 7 and 8). Together with the INJECTOR, a 15VDC power supply is supplied to inject the current. By tando it has power input, RJ45 input (LAN) and RJ45 output (LAN +DC). The SPLITTER (or separator) again separates the data and the DC current (LAN + DC) that will feed the device. The maximum distance between these two devices is 100m, which is defined by the IEEE 802.3 standard itself. It allows 3 different voltages: 5V/2A, 7.5V/1.5A and 12V/1A, which adapt to most devices and selectable by means of a switch located in the SPLITTER. Works with TIA/EIA-568, Cat.5/5e, 4-wire cabless for 10Base-T or 100Base-TX. The SPLITTER module therefore has input RJ45 (LAN + DC), power output (DC) and output RJ45 (LAN). Together with the SPLITTER, there are 3 15cm power cables with different DC connector diameters, and a 15cm Cat.5e hose. Size of the modules of 64x42x21mm.
  • Gross Weight: 500 g
  • Number of packages: 1
  • Master-pack: 20

Technical terms

  • Categories network cables
  • RJ45
  • PoE
  • Types of network cables (UTP, FTP, STP)
Categories network cables
Depending on the quality and type, network cables are classified into categories that help us know the characteristics of them.

The categories of network cables most commonly used are:

- Category 5
- Category 5e
- Category 6
- Category 6
- Category 7

As can be seen, category 5e (enhanced or improved) and category 6A (Augmented), are an improvement of categories 5and 6, respectively, which it has improved the top speed and bandwidth.

The higher the category, the higher the speed of maximum data, the maximum 100 meters distance as its standard.

You can see a table which shows the 5 categories, where V is the maximum velocity, D is the maximum and MHz frequency which can work away.

Do you have any question about this product?