12/31/2024 12:23 a.m.
http://34.77.62.133/en/products/tp-link-mc110cm-multimode-scupc-media-converter-rj45-fast-2km-TP392/
http://34.77.62.133/en/products/tp-link-mc110cm-multimode-scupc-media-converter-rj45-fast-2km-TP392/
TP-Link MC110CM Multimode SC/UPC Media Converter - RJ45 Fast 2KM
TP-Link MC110CM Multimode SC/UPC Media Converter - RJ45 Fast 2KM
REF: TP392
Specifications
- Media converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.
- Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards.
- It is compatible with multimode fiber optics using the SC connector.
- It is suitable for use as a stand-alone device (no rack required).
- It has a TX port with Auto MDI/MDI-X and Autonegotiation of duplex mode.
PVP
€28.85
Price including VAT:
€35.49
PVD
€26.13
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
100%safe
Specifications
- Media converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.
- Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards.
- It is compatible with multimode fiber optics using the SC connector.
- It is suitable for use as a stand-alone device (no rack required).
- It has a TX port with Auto MDI/MDI-X and Autonegotiation of duplex mode.
Related products
Keywords
Did not find what you were looking for? These topic could help you
More info
TP-Link Media Converter designed to work in accordance with IEEE 802.3u 10/100Base-TX and 100Base-FX standards. This unit is used with multimode fiber optics with an SC connector, and supports short wave (SX) lasers for full wire speed transfer rate at 1310nm. In addition, it offers the possibility to configure the switch for Half-Duplex or Full-Duplex transfer modes for the FX port, as well as Auto MDI/MDI-X for the TX port and Auto-negotiation of duplex mode on the TX port. Status LEDs on the front panel allow easy status identification and use as a stand-alone device without the need for a rack or with TP-Link's 19" system rack. Increases fiber optic range up to 2km, offering reliable and fast data communication Manufactured by TP-Link with reference MC100CM.
Specifications
Specifications
- Media converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.
- Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards.
- It is compatible with multimode fiber optics using the SC connector.
- It is suitable for use as a stand-alone device (no rack required).
- It has a TX port with Auto MDI/MDI-X and Autonegotiation of duplex mode.
- It has status LEDs on the front panel.
- You have the possibility to configure the switch for Half-Duplex / Full-Duplex transfer modes for the FX port.
- Increases the range of fiber optics up to 2km.
- Colour: Black.
- Technology: Shortwave (SX) laser at full wire speed transfer rate.
- Connections: Multimode fiber optic.
- Ideal for extending the distance of fiber optics.
- Gross Weight: 470 g
- Product size (width x depth x height): 10.0 x 8.0 x 3.0 cm
- Number of packages: 1
- Packages size: 21.0 x 17.0 x 7.0 cm
- Master-pack: 1
Technical terms
- Categories network cables
- RJ45
Categories network cables
Depending on the quality and type, network cables are classified into categories that help us know the characteristics of them.
The categories of network cables most commonly used are:
- Category 5
- Category 5e
- Category 6
- Category 6
- Category 7
As can be seen, category 5e (enhanced or improved) and category 6A (Augmented), are an improvement of categories 5and 6, respectively, which it has improved the top speed and bandwidth.
The higher the category, the higher the speed of maximum data, the maximum 100 meters distance as its standard.
You can see a table which shows the 5 categories, where V is the maximum velocity, D is the maximum and MHz frequency which can work away.
The categories of network cables most commonly used are:
- Category 5
- Category 5e
- Category 6
- Category 6
- Category 7
As can be seen, category 5e (enhanced or improved) and category 6A (Augmented), are an improvement of categories 5and 6, respectively, which it has improved the top speed and bandwidth.
The higher the category, the higher the speed of maximum data, the maximum 100 meters distance as its standard.
You can see a table which shows the 5 categories, where V is the maximum velocity, D is the maximum and MHz frequency which can work away.
